===============================================================================
RAISONANCE S.A.S.
17, Av Jean Kuntzmann
F-38330 Montbonnot - France

Phone:      +33(0)476610230
Fax:        +33(0)476418168
Web:        www.raisonance.com
Support:    support@raisonance.com
Info:       info@raisonance.com
Sales:      sales@raisonance.com

--------------------------------------------------------------------------------
RKit-ARM Version 1.22.09.0254 ARM7_pgm.exe PATCH                      2009/10/05
--------------------------------------------------------------------------------
Copyright (c) 1995-2009 Raisonance S.A.S. All rights reserved.

Thank your for choosing Raisonance development tools for your microcontroller
project.

These are the details about a patch for RKit-ARM.

================================================================================

--------------------------------------------------------------------------------
    Fixes
--------------------------------------------------------------------------------

        This patch corrects ARM7_pgm.exe with NXP LPC devices on these errors:
        1. Blank-Check command did not report blank status correctly. 
           Always reported "NOT blank".
        2. Blank-Check command did not display status report.
        3. Blank-Check command status report was appearing in place of 
           errors of following commands if there were some.
        4. Verify command did not ignore addresses 14 to 17 as it should 
           for the checksum vector.


                    WE RECOMMEND THAT YOU APPLY THE PATCH
                  ONLY IF YOU ARE WORKING ON NXP ARM7 TARGET


--------------------------------------------------------------------------------
    Installation
--------------------------------------------------------------------------------

        IMPORTANT NOTE: This patch applies ONLY to RKit-ARM
                        version 1.22.09.0254 Released on 2009/09/15.
                        If you are using any other RKit-STM8 version
                        please ignore this patch.

        Follow these steps to install the patch:

        1) Unzip the files from the patch archive file.

        2) Make a backup of the files from your Ride Installation
           directory in the "bin" subdirectory (those which are also in the patch).
           The default is "C:\Program Files\Raisonance\Ride\Bin\".

        3) Copy the new files in place of the older one.

        4) You are done. Check that  programming is functional.

==================End of File===================================================